Ima just chip in here. Im soon completing my board with a Unity that has been laying at my house from one of the last batches from enertion. Is there any precautions i can take to minimise the risk for say, the builtin precharge? Im going to be usin a lookkey out of an XT90S, should i bridge those 2 pins of the momentary switch and simply remove that switch?
It’s possible you have a cold solder joint in your battery or xt90 that intermittent if you loose power during regen it will blow the tits off a unity/tenka. They are also prone to self destruct of the 3v.curcuit requiring new regulator, MCU, leds ECT…I doubt it’s your config. Maybe lower your regen in future. Although if the above were true it would not have helped. I would change to a makerx DV6 ESC and loopkey. Way more robust.
Just to loop back on this for completeness, @Fatglottis kindly bypassed the Unity’s onboard a/s for me and so far ever since she’s been running like a dream. If you experience similar related issues, and assuming he’s willing, I’d recommend working with Simon to get yours fixed too.
Any idea why my Unity won’t detect my Maytech temperature sensors please? Comes up false for both. Hall sensors detected fine and motors running well. Unity running on VESC firmware. Just no temp reading…
Anyone knows of some ble modules that will work for the unity that I can get relatively quickly? My current one shows up but doesn’t connect when using the vest app for android or the stormcore app for iOS. Its use to to work but now it just won’t connect to the built in ble module. Any help would be greatly appreciated
Can someone give me some input on something regarding my setup…
I got sensorless motors, setup in FoC and im getting super twitchy starts from the bloody thing. I thought that Foc mode should minimize the twitchyness of it all? even if i have sensorless motors? Runnig sw 5.2 on the unity. If that matters…