Flipsky 75100 FOC 75V 100A Single ESC Based on VESC® for Electric Skateboard

[Chricious]

Here are some logs of my first tests

How to update firmware on the Flipsky 75100 & 75200 FOC ESC

The over current is not my biggest concern since, it runs fine with 100pA. The over current fault occurs just over 100pA when it’s running out of specs. My concern is the lack of power and the produced heat. The power @120pA (37bA) was decent, @100pA (34bA) it is ok. But the big difference between pA and bA is stressing the controller too much and it runs hot in a couple seconds. Here are some logs with 40pA, 50pA, 60pA, 70pA all set to 120bA. Even @60pA it runs way too fast hot and th…