I work on a reliable, well thought out and as cost effective as possible board.
The parts from which I build:
Deck - 80cm 9 layer maple
Trucks - This is going to be a big question. I am working on a solution of my own but in many cases the online version would be simpler (pictures later)
Drive Train - HTD5M 15 teeth + 535mm timing belt + 3d printed big pulley about 70teeth
Motors - 2x 6384 BDUAV 120kv 4.6kw / piece
Motors cooling - 3d printed fans
Motor mount - Laser cut plate
Wheels - 200x50mm pneumatics (later with off-road tire)
Battery - 13S1P A123 AMP20 + custom 3d printed holder
BMS - Aliexpress 13s BMS but later I want to build my own DieBieMS
ESC - CheapFOCer (copper plate reinforced conductor, JST connectors and water cooling)
ESC cooling - I am planning my own water cooling circuit (pc water cooling components and bimetal temperature switch pump on 40C fan on 70C)
Remote - I want to ask for help (lingyitech). Could this work with vesc?
Like Bill said, that YingLi remote won’t work, but these can be found for cheap and are really good as long as you are gentle with the on/off switch:
But notice that remote is number 9 on that list above.