wear a helmet
Will post photos later. Much love fellas
Will likely get a new deck and enclosure once I get the hang of things. Otherwise a good first run on everything.
End specs
2x 5S 8000mah batteries
2x 4.20 flipsky vesc
110mm TB wheels
TB 218 trucks
Amazon enclosure
2x 6354 190kv motors
Mini remote
I think thats it. Thank you all for your help and support. Much love to the eskate fam.
That’s sweet build. Very clean
Yeah, your board looks great. Glad you’re happy with it, too!
@Full-send I do recommend shorter housing screws. That’s a trip up waiting to happen and it’s gonna bug you esthetically sooner or later
Yes! Another lesson learned. I’ll be fixing that shortly
So… My first problem has surfaced. Today while I was riding, one of my motors started to make an unusual noise. My right motor is spinning freely. I can grab onto the wheel and spin the motor. Not sure what this means or how to fix. Any suggestions folks?
All the wires are connected properly?
Is your motor pulley still turning in step with the wheel?
Yes it is. I have a keyway on it and checked to make sure everything is still tight
Can you post a vid showing the difference?
The shaft is loose. And i can pull it out
Spot on mate. Gonna have to get some red thread locker
24 hour cure minimum. Ask me how I know.