Niklas
April 10, 2020, 12:27pm
#5
How much could you do for a single VESC?
They’re a bit pricy… I can get them new from China for 50 Euros, so what can you offer me:)?
rusins
April 10, 2020, 12:30pm
#6
Bump! Dropped prices, and added a 12s BMS with 80A discharge.
@Niklas The current price in the listing is what I’m offering them for. Might drop the price again, although I might just keep them
Niklas
April 10, 2020, 12:34pm
#7
How much is shipping? Im afraid buying them new will turn out cheaper I guess ^^
rusins
April 10, 2020, 12:34pm
#8
Which country are you from? I can check then
Niklas
April 10, 2020, 12:42pm
#11
Okay, guess I’ll go new then
Thanks!
1 Like
rusins
April 14, 2020, 2:37pm
#12
Motor & ESCs are sold; blue deck is pending sale.
Edit: blue board sold
rusins
April 17, 2020, 3:39pm
#13
Added a 1.5A 12s charger. Good value for a budget build!
1 Like
rusins
July 5, 2020, 6:40pm
#14
Reduced the price of the BMS, and added a malfunctioning focbox:
rusins:
Enertion Focbox v1.6 in semi-working condition – 60€
I had to cut off its CAN chip after using it in a double setup
I replaced the phase wires with long ones with 5.5mm bullet connectors. (Can include 4mm if you want. 5€ extra to solder them)
It worked fine, but its mosfet temperature sensor is broken. Shows a constant 25 degrees C no matter what.
After testing a different motor with it, something went wrong, and now in FOC mode it stutters a little / makes a loud sound past a certain speed limit when riding.
In BLDC mode it seems to work fine, but the motor heats up quite a lot. Maybe it’s just BLDC mode, maybe it isn’t driving it correctly, don’t know.
I had superglued the receiver wires into the receiver, and when pulling them out the connector broke. I did a small hackjob to make it usable again. For 5€ I can solder on a non-broken connector if you care about it.
More pictures
Price: 60€
1 Like
Shipping to belgium for the deck?
rusins
July 5, 2020, 6:59pm
#16
Looks like 50€. DPD say they can do it for 25€, but a year ago they just never showed up and after rebooking 6 times I just had to cancel the pickup. I mean we can try if you want
1 Like
rusins
August 27, 2020, 11:16am
#17
Big deck has been sold! Reduced price of the Focbox to 50€.
Might add some Boardnamics mounts to the sale, not sure yet.
2 Likes
rusins
March 2, 2021, 3:25pm
#18
Selling a pair of motors! These cost me 320€ new. Will be decreasing the price over time so get them before someone else does
rusins:
6880 Maytech 180kv motors with support bearing from Bioboards – 270€
180kv
25cm phase wires
35cm sensor cable (no adapter needed for vesc)
5.5mm bullet connectors (don’t recommend changing them due to wire enamel)
40mm shaft, 10mm in width. 19mm keyway slot
(I believe these are battle hardened from the factory, but haven’t opened them up to be sure)
Unused, just tested on the bench just now prior to selling. 1 motor sounds like the can is scraping against the stator a little (ironic, considering these have a support bearing). I’ve included a video showcasing them working / the sound:
- YouTube
Reason for selling: I’ve heard some reports of these motors not being good in wet conditions due to the outer bearing, and I need motors with an 8mm shaft for my build anyway.
Price: 270€
3 Likes
rusins
March 4, 2021, 12:17pm
#19
Dropping the motor price to 250€ for both!
I can ship internationally too!
1 Like
rusins
April 4, 2021, 11:45pm
#20
You people drive a hard bargain… 240€ for the motors it is.
1 Like
rusins
July 6, 2021, 11:26am
#21
Focbox sold, but I’ll have another one just like it available in the coming days. Mosfet temperature reading doesn’t work, can chip removed (i.e. CAN doesn’t work), extended phase wires.
Probably also going to let it go for 30€ + shipping.
Reason for selling this one: friend was getting cutouts, and I wan’t to eliminate the variable of the ESC overheating on a hot day under load.
2 Likes
rusins
November 30, 2022, 10:58pm
#22
2 Likes