eMTB & Street Carver Room (Pics & Specs)

mmaner · October 25, 2019, 3:05pm

Tonkatron · October 25, 2019, 3:07pm

Nowind… Thats who I got my drive kit from 3 years ago.

mmaner · October 25, 2019, 3:29pm

also, here’s an adaptor that sits between the wheel and the pulley so you can use them on Trumpa wheels.

To make it work you need to press in the nuts to the adapter on both sides then attach the adapter the wheel, then the pulley to the adapter.

DEEIF · October 26, 2019, 5:31am

@Tonkatron What’s your setup on your Emtb Moe?

malJohann · October 26, 2019, 6:02am

#justlookatthatass

Soon to be running again, and an incoming deck swap to a Haero Bro.

Riako · October 26, 2019, 8:05am

Beautifull mate ! Share it here too

Edit ho, you already did in Jun. ! ^^

Tonkatron · October 26, 2019, 12:49pm

Nowind 25mm belt drive kit, 192kv SK3, 10S8P 30Q, LLT Smart BMS, 2 x flipsky 6.6 (OG in alu cases)

Saturn_Corp · November 9, 2019, 4:07am

Posted this in the hanger length thread but it was a bit off topic and noone answered.

Can someone explain the “channel truck lean back” to me? I understand it has something to do with the trailing rear truck being more stable due to the angle or something than the front with the reverse angle but I"m not sure that’s the full story.

malJohann · November 9, 2019, 11:07am

@Saturn_Corp it’s all about steering angle. Looking at the kingpin, if the angle at the front is steeper than the one at the back, then the same amount of lean will result in more steer at the front than the back. So, your back wheels will act as stabilisers, and the front as destabilisers, as it should be.