Duality Trucks by Tito Systems

My titos will be here Saturday. I’ll see if i can’t come up with something

5 Likes

Flipping the hanger wouldn’t change the truck geometry itself. Potentially having the baseplate further with bolt holes further out might due to deck flex. That would still be my first choice for offroad.

The kingpin would be ~20mm higher and might not hit in your log scenario. Instead of being below the hanger profile it would be a little above flush. With 9 inch tires you would have ~85mm clearance to the lowest point, which would be the pivot arm.

Not against the plastic bash guard as a secondary option, I’ll have a look into it when I have some free time.

4 Likes

Surfrodz do this as well, I’m a fan of this approach more than a bash guard.

Both would be ideal.

1 Like

Thanks for being so open to feedback, Tito!

I’ma follow this closely. I, too, want trucks that can do double duty for street @ 35mph & off-road trails with maximum practical ground clearance… both with 9" tires :grin:

10 Likes

Oh happy day!!!

Just planning on running them regular.

Adding 5 degrees in the back per Tito.

The front has a 5 more than my set on the Flux…
So this will be slightly different…

15 Likes

Man I’m so jealous.
USPS hates me i guess.
Look at this tracking history.

5 Likes

Lol.
Mine drove a mile past my house on the way to Saint Louis.
Then drove past back by on the way to Kansas City.
And finally showed up…

But my sheet of grip tape is going on 2 weeks and I can’t really get going without it…

5 Likes

Post Hurricane Milton i had a package stuck in Ybor city for 5 days, than St Pete for a few, then went back to Massachusetts, then arrived the next day.

Yesterday, i got an email from Ebay saying my package was delivered at my front door, by USPS, hours before USPS regularly arrives. USPS tracking said the same. 2 hours later an Amazon Prime truck dropped it off.

Weird shit going on in the package delivery world.

3 Likes

Exactly how I’ve got Nothing Fancy set up :slight_smile:

6 Likes

Did you have to use risers for enclosure clearance? I’m stoked to be going top mount for all the clearance

1 Like

Nope.
I “solved” the scraping issue with steel skid plates

9 Likes

It’s one of the more Mad Max things I have seen in here and I love it!!!

4 Likes

seminole-orlando facility, so… somewhere across half the sate. lol.

YBOR city. I helped install and program lights at masquerade in ybor city. (club that closed in 2006 )

Also got involved in a very short lived massive brawl on 7th street… ah memories. :smiley:

(formative years living in palm harbor)

1 Like

I tested these… it’s fun. :smiley:

3 Likes

I totally remember masquerade!!!
Was that the one with the spinning dance floor?

1 Like

What ever happened to “Stop the Steel”?

2 Likes

I don’t think it had that. Looks like that was a block away at Amphitheater

1 Like

Im partial to steel lol.
But im also biased.
I also dabble in Titanium.

#justknifemakerthings

1 Like

I did a thing
image

29 Likes

gonna have to get all the boards by your tent for a pic

6 Likes