It feels like this is settling into place finally but has changed a little from the initial outline.
Demonseed 42’ with modified Eboosted Single Stack enclosure
18s4p Moli 21700 (Battery build pending)
138kv 6374 (Pending acquisition)
3DS Fatboy 240
Maker X D100s
There’s much still to do, mostly it’s the irritating little tiny little fine detail stuff that will be the first to break and look the shittiest the fastest.
Ive also had a go at redesigning the controller case to be a bit less angular and sit back a bit further. Same idea with a click together arrangement.
The plan was to use up as many parts as possible but I didnt count on the purchase of the 138kv motors and that has thrown the budget a little but only a little… I also oddly didn’t factor in a new Puck for the board and added that today as well. Not too bad considering.
(AUD)
