DemonGeese | Semendeed | 21s4p | 2x D100s | 4wd

[fessyfoo]

@fessyfoo

• fault stop time 75ms

Mine are currently at 75ms. I think i’m gonna drop mine down to 50ms before I push that board again. despite @Deodand’s warnings.

@fessyfoo

I set fault stop time down from 3s to 50ms triggered several faults in a row and didn’t even notice. ie the cutout didn’t send me wobbling.

@Deodand

Just so you are aware setting fault time that low can cause your ESC to blow more easily when other faults are triggered (overcurrent etc). Played around with this a bit when I was debugging something else and found that setting the fault timeout super low would blow FETs much more easily.