Cloudwalker 2.0

DIY Builds
1

It was 50s today, took the chance to update the old cloudwalker and swapped the trucks and drives over to haggy’s

image
image2048×1536 598 KB

image
image2048×1536 638 KB

image
image2048×1536 529 KB

  • Haggy 190 kv motor, Hangers, 6inch Tires @haggyboard.timo
  • Avio Herringbone Gear drive @avX
  • Hammock Baseplate @rey8801
  • Deck - Pro 90 @MBS
  • 10s 10000mah lipos
  • Unity

Not a fast board. Built for lazy afternoon carving hence cloud “walker”

Its been a while since I rode a RKP setup. That and the fact that the board rides high makes it feels very twitchy for me. Ordered harder bushings, hopefuly that will help with the issue. First ride out I didn’t tighten the gear drive and it dropped. Luckly there wasn’t a single scratch on the drive. Not so lucky one of my motors is now textured pavement style :frowning:

Dragged the damn thing home tightened it up can went out again. The drives are amazing. Super smooth and quiet. easy to put together too. 2 items on the wish list. Would love to be able to reverse mount. Would love same platform on other trucks like MBS :slight_smile: Otherwise love the damn thing 2 thumbs up!

15 Likes
2

Nice! Glad you like it!
It’s hard to keep the drive small if it’s a reverse mount… ):
As for other trucks, it may be work in progress (:smiley:

Hope you torqued it down properly woth a torque wrench and not just an allen key haha. Blue loctite goes a long way too~

2 Likes