ChortL | 29.75" John Grigley | 3WD | TB130 | BN145 | 10S | 100 cells [SRO]

Some earlier test fits

5 Likes

Some enclosure photos

16 Likes

lighting

2 Likes

motahs

8 Likes

deck

aluminum oxide crystals

5 Likes

figuring out belt sizes the non-theoretical & wholly empirical way

6 Likes

mounts

15 Likes

some clearance checks

12 Likes

There exists puck shells that make it into the least popular remote throttle design out there.

1 Like

I don’t see anything commercially available. What, do you expect me to DIY something?

:rofl:

3 Likes

If crayons were only sold in red, then red would be the most popular crayon color. That would not imply red was the best crayon color.

1 Like

No one is preventing the creation of blue crayons, yet all the best crayons are red

Everybody knows green crayons are the best.

This build is awesome

10 Likes

Build is insane, and agreed a good trigger remote would be nice. I always debate the Trampa wand with the trigger attachment, but soooo expensive.

1 Like

Yeah I’ve had them delaminate at 165A motor current

This is one reason why I went for 3WD

1 Like

Because only three cores still holding solid? Same set of wheels?

1 Like

Three ESCs each have a receiver, in metr you can switch which ESC is the master on the CANBUS.

1 Like

It’s a different set of wheels, just prevention hopefully.

1 Like

Why 3 rather than 4?

There is not space for 4

Even if I could fit the motor, there isn’t room for another phase wire connector or another ESC. Mostly the phase wire connector.

2 Likes