Automatic calibration
works aight
- make sure the tool is connected to the ESC and RT APP is turned on
- make sure the remote is connected and paired with its receiver and its failsafe is set
- turn on the remote
- read app settings
- reset the calibrator
- operate the throttle from one extreme to the other a few times
- release throttle to center position
- click apply
- [optional] decrease deadband, 15% is rather high IMHO (10% seems better)
- write app settings
- turn off the remote and make sure the throttle stays within the deadband area (if not, redo the failsafe setting)
- enjoy