BNE to LA with an esk8

[Egtscs]

The Prince | 12s10p flight-safe Idea deck build

[image20220726_232419750] Probably shouldn’t have shorted the balance cables, they end up everywhere in a mess. I wanted to mount the BMS on the lid, oh well. I think I’ll use velcro to hold the packs together. I don’t really have better ideas for keeping them from moving at the time being.

The Prince | 12s10p flight-safe Idea deck build

Building the first battery module Since I have a 10p pack, I figured I might as well build this battery for high current capabilities. I pull 80A from my urethane build, so 90A I would be very happy with. Each pack is actually slightly taller than an XT-90, so that + 10AWG wires it is. The problem – the cell layout. [image] As you can see, the space in each box for the wires is parallel to the cells. This was fine for the original 10s1p batteries, but this means I don’t have easy access to …

Couldn’t find the one from Poast but I’m pretty sure it’s a similar idea