BLACKLIGHT - Elofty Direct Drive / Focbox Unity / 97mm Abec Clones / 10s Swappable Lipo / DIY 3D Printed 2-part Enclosure / Skateshred Deck w/ glass & 3d printed frit

[ryansinatra]

Forget the grip use Glass Frit

I am sure most of you know how to do this but for those who do not I will be taking you through the steps I use for putting a layer of glass frit on the board as griptape. First there are a few different ways that people on here have done this. For instance @Sender use epoxy which works very nicely but depending on where you are it may not be readily available or the price tag may be too high. You can also use lucid grip which uses glass frit but is a spray on adhesive and it doesn’t last whic…