Beginner Question Thread! 2023 Edition

[Razillian]

I opened up my board today following my confession here:

Esk8 confessional

I think I blew the fuse on the charge port for my Demonseed build. Pack shows fine on Bluetooth and the board powers up no problem, but no reading on the charge port. It’s been sitting for a week like this because I am afraid to take the enclosure off to take a look. I know deep in my heart that once the enclosure is off I’m going to spend far too long fucking with shit and I don’t want to devote the time to that

Fuse is fine. Charge port is fine. Voltage on mains is 49.1V. Voltage on charge line is 49.1V.
BMS is connectable via Bluetooth, everything looks good there (I think) with voltage at 49.4V.

Next steps?