Archived: the OG noob question thread! 😀

[KaramQ]

Thanks!! Will definitely send you a pm if I need help in the future

[Lazea]

Pff. But î like how she Lock

[Alpacaslapper]

Is he blowing vescs due to exceeding the erpm with those high kv motors?

[Sn4Pz]

Speaking of blowing vescs via the motors…

How can I tell if my motors are bad before I do motor detection? I’ve got two motors I want to use for an upcoming build, but I bought them used and don’t want to blow my Unity

[Andy87]

you can try this

The light white - an eMTB jump story

Let´s bring some more usefull information to this thread. A while ago I shorted 3 of my motors because the mounting screws where 1mm too. Due to vibrations the screws rub off the isolation and than shorted the phase wires to each other via the motor case. Here is the way how I fixed it and double checked that everything works without issues. I measured the resistance from the mounting hole to the phase wires like this [1] That gave me 0 ohms, so a full short. I thought I can easy fix it b…

[Harrisonwms1]

What dual VESC should I use? This my original Idea https://flipsky.net/collections/electronic-products/products/dual-fsesc6-6-plus-based-on-vesc6
Using 6374, 140A dual max,

[NingNing]

What’s the stickiest skate wheel available at the moment??

I have Abec fly 97mm and I feel like I’m skating on glass.

[ShutterShock]

What are you skating on? I have ABEC 11 Refly 90’s and they are super sticky, hard to even break traction in the rain

Have you worn off the shiny factory finish yet?

[Kellag]

Green 107s are pretty goopy in my experience

[KaramQ]

Exactly

[KaramQ]

I’m selling the stickiest sets on the market other then tb110. With pulleys

[ShutterShock]

I mean that isn’t because of VESC tool settings lol that’s the motors + voltage + the ERPM limitations of the DRV chips/circuit

[b264]

If you like the way a board looks when it’s broken on the bench, use them!

[b264]

How to hand-test a BLDC motor [SERIOUS]

Sometimes if you’re buying used, or troubleshooting, and need a quick way to see if anything might be wrong, you can test a BLDC motor with only your hands. It’s not the most accurate test in the world, but catches most problems. [f5c1e17e62e9f244432bf763be93746978c88931%20(copy)] Ensure motor phase wires are not connected to an ESC or anything else. Verify the motor spins without grinding or rubbing. Put a tad of sideways stress on the shaft and push it and pull it (while turning) to veri…

[Lazea]

damn

[KaramQ]

You know, at this point of time, I know It was the motors it still made my vesc blow.

[ShutterShock]

Lol I would hope so - I just mean you can’t blame vesc tool for that haha

[KaramQ]

Did I blame the vesc tool? It’s just human error and I simply don’t trust myself to operate with a vesc anymore

[ShutterShock]

Haha no I was just poking at being scared of it lol it’s okay it is complicated

[Lazea]

22 awg wire . for bms ??