Anybody have a dual VESC laying around…?

Esk8 Parts Market Parts Wanted
1

To sum it up, I was stupid and did something I shouldn’t have and fried my makerx d100.
I am using this build Obrua Nur | A Teens Esk8 Journey for my 8th grade graduation project. It is due in May and I still need to get more footage of riding it. I’m not too picky on specs for the vesc, it’s needs to be dual, preferably smaller size. A makerx would be nice, but I would take really anything for now.

3 Likes
2

Battery-12s2p

Sounds like almost any esc can handle the power levels.

XT90 Plug (Male and female) x 1
4mm bullets connectors(GC4013) (Male and female) x 6
PH2.0MM JST cables

3 Likes
3

V6 and FOCbox/Unity, not V4

3 Likes
4

Yes v4

2 Likes
5

I thought v4 maxed out at 10s?

1 Like
6

Nope. Still using 60v hardware.

I personally ran 4.12 at 12s for years.

4 Likes
7

Oh, huh, learn something new every day 'eh.

1 Like
8

They are also based on 4.12 btw.

Stormcore is v6.

5 Likes
9

Yeah I thought they were specifically different to 4.12 though, anyway this is derailing a bit.

10

I’ve got a spare focbox tenka lying around

3 Likes
11

4.12 isn’t great on 12S but all the other V4 are fine. 12S can be used on 4.12 but you need to be careful and use very conservative settings.

1 Like
12

Also, If anybody want to buy/have it, there’s probably still salvageable parts…?

13

if you’re giving it away, I was considering collecting broken vescs to practice repairing them/swapping out MCU and DRV chips.

1 Like
14

Makerx are usually pretty accommodating with repairs. You should be able to send it back to them to get it fixed

3 Likes
15

Sorry to hear it man, that’s unfortunate.
We don’t call diy esk8 a money pit for no reason

4 Likes