Things went well today!!
The double barrel in the front lasted less than 50m until I swapped the roadside back to the krank cone that was previously there 
I’m not convinced on the APS tbh, my past experiences have been good but I don’t think it vibes with this board… will keep playing with bushings.
The wheels are awesome! Little bit sketchy over debris, especially with the RTS, definitely keeps me on my toes. For smooth paths/roads, these wheels are awesome and efficiency is significantly better. I don’t have any comparative numbers but the app told me I still had over 50% battery left after 32km today so it seems promising I might get to at least 50km.
The production sr125s are already a lot more efficient than the ones on the genesis boards, due to being a harder duro rubber, but they are still thirsty wheels! They really are amazing wheels though and perfect for exploring pretty much anywhere you want at the cost of range. I think i’ll be chopping and changing between wheel types semi regularly tbh.
I did have to tinker with the RTS a little, but i don’t fully understand exactly what all the settings are meant to do, so I was kinda cautious… @Tony_Stark is there a ‘how to’ anywhere for RTS settings?
i also completely redesigned the handle last night. Printed and fitted today, very happy with it and I believe it is good enough to share. Have at it
STEP and F3D for big boys
Mach1 handle.f3d (913.8 KB)
Mach1 handle.step (520.3 KB)
3MF for basic bitches
handle.3mf (58.6 KB)
handlemountleft.3mf (40.2 KB)
handlemountright.3mf (40.6 KB)
handlespacerleft.3mf (10.1 KB)
handlespacerright.3mf (10.1 KB)
I’ve designed it with spacers to accommodate printer and/or mount location tolerances, also kinda cool to add a little color splash. I recommend printing the handle and the mounts first, fitting the mounts to the board mounts, then measuring the gap left with the handle in place. Split that measurement in two and print the spacers at that height.
You will need:
4 x M5 x 30 CSK
4 x M4 x 12 SHC
4 x M5 Nyloc nuts
If you add this handle to your Mach, be sure to send me a photo and let me know what you think!!
Cheers, enjoy!
EDIT: uploaded revised design