3D printables for esk8

[Redeye]

Here is a protective cover I made for the puck, the stl file is in this post:

Pucking Positions

I’ve been happy with my TPU printed Puck sleeve making much easier to hold with just the fingers. For those that asked for the stl file, here it is: puck’n’cover.stl (119.6 KB) I print with Sainsmart TPU, which is 95A and has great layer adhesion. The fit is ultrasnug, so once you insert the puck, you’ll only get it out by cuttting the puck’n’cover.