3D printables for esk8

mmaner · March 17, 2019, 1:21pm

I haven’t gotten any TPU yet, shits expensive.

moon · March 17, 2019, 4:31pm

I can see on amazon that you can get 500g rolls that is plenty?

apparently not good

Andy, I would like to check how much this cost to make from aluminium, PM me

Andy87 · March 17, 2019, 4:35pm

Which one? 66th or 55th 20mm belt or 15mm

moon · March 17, 2019, 4:39pm

66t 20mm

Andy87 · March 17, 2019, 5:05pm

Just found out there was a small miss alignment on the 55th. Will check tomorrow if that’s the same on the 66th with 20mm and sent you the reviewed step files than.

LR-designs · March 21, 2019, 4:04am

Here is some things I have a put on thingiverse. I also have a GT2B case I really need to put up there but haven’t, its 98% done and works for me but not perfect level for sharing.

Abec pulley

Davega case

Surfrodz RKP angled risers

Surfrodz RKP press fit mount

Rain fender for my SR mounts

Riako · May 27, 2019, 3:54pm

yelnats8j · May 28, 2019, 12:51am

Loop key and charge port riser pad, keeping the holes in the board to zero. It also has a spot in it for a fuse.

BigBen · May 28, 2019, 4:38pm

Do you have file for this?

Skunk · May 28, 2019, 4:49pm

@mikenyc wanna design and post some tail bones? Lol

yelnats8j · May 28, 2019, 4:58pm

Ive gotta fix a few things then I will post them.

mikenyc · May 28, 2019, 5:13pm

lol sure why not.

think anyone wants those rib bones?

Skunk · May 28, 2019, 5:14pm

Maybe? They work good as a lip for a minimalist handle

mikenyc · May 28, 2019, 5:16pm

Alien used to make these, but it seems that they’ve stopped. If there’s enough interest, I’ll try to crank it out next weekend.

dani · May 29, 2019, 1:33am

I’ll add my stuff, enjoy.

Fishhook remote - mini remote mod to make it thumb controlled and much more ergonomic:
https://www.thingiverse.com/thing:3363745
Bindings for esk8. We are still looking for a name:
https://www.thingiverse.com/thing:3619398

Dani

RedBaron · May 29, 2019, 9:52pm

Here is my version of a flipsky dual 6.6 original external enclosure. See thingiverse notes for more info.

And this is a dampener I made to be used with Evolve Supercarve DKP trucks. This helps give feedback to the 2nd kingpin (swing arm) while turning or carving to reduce wobbles at higher speeds and provide a smoother range of travel while also protecting the underside of your deck from hardware digging into it.

BigBen · May 29, 2019, 10:26pm

I made a jig to hold 3 21700 cells for welding. I printed a couple so I could put one on each end.

mishrasubhransu · May 30, 2019, 1:34am

I have made a separate thread for CAD requests: 3D files / CAD request thread.

Please use it if you feel final submission and request thread should be different.

mishrasubhransu · May 30, 2019, 1:35am

mishrasubhransu · May 30, 2019, 2:22am

https://drive.google.com/drive/folders/0B1q9GisJy4tHN1JiSlZubmVpaUk?usp=sharing