@Arzamenable for president.
The far left piece came off build plate. I superglued it back on. Hopefully the glue didn’t go past the layer of PVA I put down.
2/3 parts ain’t the worst.
Dude you’re amazing… Just tell me when ya need money and address sir
Just pay it forward.
Do you have epoxy? Are you going to use a gasket in between the joints so it’s a flexy enclosure?
I’ll throw in an extra middle segment so you can go longer. I botched the middle section on this print, will try again.
Mike did you design the locking mechanism??
It looks great! I definitely need the length the fit both the battery and esc! Dude you are amazing!!! Are you able to just print the middle?
Dude that’s amazing and then I’m probably going to use a gasket now that you did 2 or expoy is that gets to hardd
Pretty awesome!
Teach us your ways. Impressive man
Bite off more than you can chew, choke on a project out of your depth, and refuse to cough up whatever you’re choking on.
There, second try on PETG settings. 5 mins of manual post processing. No sanding. They just fit.
10% of roll is left. If you don’t request anything, I’m sending a print of brass knuckles.
You mean you rubbed the vodka on it?
Dude you’re a beast! Brass knuckles is cool bro
Awesome! Toldja someone on the forums will be able to help you out
Yeah its the enclosure I used for my cruiser build: Portable mini cruiser | Landyachtz dinghy | meepo hub motors | meepo esc
Really busy these days and the printer has a long queue of parts. I designed the enclosure to just fit on my 300x300 build plate. Glad you were able to split them up
can some confirm that @Strandy17 name is indeed what his profile says it is? trying to get to post office before close.
It is, I know him