12x22x7mm Bearings - Any interest?

Esk8 Dev
#1

Hello everyone, posting this to see if there is a general interest in 12x22x7mm bearings.

The reason I started searching for these initially was to run urethane wheels that use 22mm OD bearings on chanel trucks with 12mm axels. These bearings exist in a few places, but are very expensive because this bearing size is not commonly manufactured.

I’m currently in communication with a manufacturer to potentially get a batch made, so I wanted to see how many others have any interest in this bearing size.

Or if you have any feedback I would like to hear more. For example, will this bearing size have potential issues due to its dimmensions, smaller space for balls…etc

3 Likes
#2

It was done before. I‘m not following those threads, but might have some input and answers to your questions in there. Here ya go:

#3

I think its a bad idea. The options we have seen previously have left a lot to be desired. I don’t think it’s a reasonable solution.

#4

Ah yes, this is very helpful. Thanks

1 Like
#5

This can be closed
@xsynatic

Thanks!

#6