Snatched this up during this during first run release to have first as a backup, then as a basis for a potential future build that never happened.
It DOES have the well documented silk screen labeling error. Has never been installed in my (or any other) board. Used for motor detection after I first got it.
$225, free shipping to CONUS
You should include a link to this documentation in the post 
Not sure exactly where it is in the thread, but it’s been repeated everywhere. Here is a copy of the verbiage from MakerX at the time of release:
Sorry. Due to our mistakes. The silk screen printed on the right HALL and PWM ports of the first 15 upper cover silk screens was wrong (reverse) (as shown in the picture). Please ignore this silkscreen and refer to the silkscreen wiring on the left or the color of the silkscreen wires. Please be informed.
We are sorry for the inconvenience caused to you.
PM’d
Thank you. Now when folks search for that and land on this thread, they can get the answer 
Close please.
