[WTS][US] My turn for a garage sale

[ReliantChris]

Heyo, so I have too many builds planned and not enough money and too many boards to ride.
It’s time to finally downsize the collection and focus on just a couple of builds.

All prices are open to negotiation and do not include shipping

3DServisas Focbox case
Description: Kinda used, doesn’t have a mounting plate
Price (USD): $50

Images

90mm Abec Refly and pulleys
Description: 74a, comes with 40t pressfit pulleys, not sure what kind since they came with a BKB dual I bought
Price (USD): $50

Images

New Balance NM913 Shoes
Description: Size 10, has reflective material on the back, my feet are too wide for them, only worn once but never skated in
https://www.amazon.com/gp/product/B07BL2CQXY/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Price (USD): $50

Images

---

Sold Items

things

Hummie Deck + multiple enclosures
Description: Old and beatup hummie deck, can keep or remove the griptape if you want
Comes with 3 enclosures, Bigben single stack and 2 unknown ABS
The bigben was the one that was mounted and is scratched and full of holes for mounting, power button, charge port, etc.
Price (USD): $80 SOLD

Images

Surfrodz TKP drivetrain
Description: 177mm Surfrodz TKP trucks
hammock adjustable baseplates (includes original baseplates aswell)
TB110 78a
3Dservisas 36t kegel pulleys
Maytech 6369
Psychotiller mounts

Willing to part out or combo together
Price (USD): $400 CHOPPED AND SOLD

Images

100mm Red Boas
Description: OG Red Boas, 83a, not really sure what these go for anymore
Price (USD): $80 SOLD

Images

Psychotiller 12s4p 30Q
Description: My first battery, many cycles, only charges to 92% ish, rode it down to 0% multiple times, doesn’t have a charge port soldered, can add one if you want

literally free just pay for shipping
Price (USD): free + shipping SOLD SOLD SOLD

Images

Haggyboard 36t kegel pulleys
Description: There’s definitely some better options out there now
Price (USD): $15 SOLD

Images

Jet Spud + Bigben enclosure
Description: Has extra holes in the deck from previous mounting, enclosure is also cut up in a few palces
Price (USD): $70 SOLD

Images

Bowery Surf adjustable baseplates for Surfrodz RKP
Description: Comes with Riptide sports 93a WFB Tall FatCone and Tall Barrel
Also never ran these myself
Price (USD): $90

Images

3DServisas Fatboy 230mm hangers
Description: Pretty beatup, never used them myself
Price (USD): $40

Images

Haggyboard 6364 motors
Description: A little scratched up, super quite and plenty of power. Comes with 15t d-shaped pulleys
Price (USD): $120

Images

12s4p 30Q w/ smart bms
Description: Built by @thisguyhere, XT60 output plug
Cells are nice and balanced, includes a 5.5x2.1mm charge port
17.5x5.5x1 inch
Price (USD): $325

Images

I will add more stuff as I find them

[Agressivstreetlamp]

maybe dumb question but will the heatsink fit dual vesc6 by Trampa?

[ReliantChris]

Almost certainly not but can provide pics to prove it

[longhairedboy]

Nicely done. I need to do this as well, but i want to hoard everything.

[b264]

No questions are dumb.
I have both here and no, it does not fit.

[Agressivstreetlamp]

all good thanks @b264 and @ReliantChris
Those motors are interesting… I need sealed but these are smaller than my current 6374s

[ReliantChris]

I’m getting to the point where my batteries are the cost of my first build, I need the funds

[ReliantChris]

That’s the one downside of the haggy motors, they’re kinda long

[longhairedboy]

Tell me about it. I need 400 40Ts for my bike.

[ReliantChris]

Or did you mean the maytechs

[Agressivstreetlamp]

I have plenty of room. Im on Trampa hangers.
I just dont want to swap them out for my current 6374 maytech open can and lose performance. I want the sealed so bad though… is it a big drop? i dont really mind a little drop in oomph

[ReliantChris]

I’m heavy guy and felt no drop in oomph, but I also did not run them very long and I’ve moved on to TB 6380’s

[surfnacho]

PMd

@Agressivstreetlamp might be able to get the free mountain board up and running now

[Agressivstreetlamp]

bruh i cant believe you actually managed that.
i think im gonna have to charge you for that deck

[Accrobrandon]

I’m interested in the hummie and enclosures pm in coming.

[surfnacho]

lol that kills the “free part”

Just need an ESC, but I think I have a potential lead…

oh also need mounts, but shouldn’t be too hard once the new cnc is ready

[Nacho]

Who’s got the free battery? Me dibs if not

[Agressivstreetlamp]

If you buy me some gear drives You can have my mounts. That still keeps your mtbs “free” and can be advertised as such.

@ReliantChris if the motors are still here in a couple hours I’ll snag em. Somebody take the temptations awwaaaaaaaayeeee

[NatS]

Great price on the hummie + enclosures. Someone grab that!

GLWS

[surfnacho]