Okay, here comes the part out!!! Let me know if you want something!!!
Item 1 (Deck, Enclosure, Battery & Charger) SOLD:
-DIY Flux Motion AT1 deck and enclosure (blank deck/no graphic)
-18s6p P42A battery w/ LLT smartBMS (premium battery build quality)
-10A Charger (w/ WM-20 connector)
Unknown miles on the deck & enclosure. The battery is brand new. Hasn’t even been cycled once (from fully charged to fully discharged). Kept at storage voltage.
SOLD:
Item 2 (Trucks):
-BN 310 Split Angle Channel Trucks (+5 in the front, -5 in the rear)
-Radium Titanium Axle Nuts:
No bushings included. Less than 50 miles on the trucks. Tiny indentation in the clamp area from the 4GS drives. No scratches or scrape marks. In new condition.
$150 OBO (USD) w/ free shipping in the CONUS:
Item 3 (Wheels) SOLD
-MBS Pro II XL Hubs
-200x50 CST tire and tubes
-MBS 12x28 Bearings
-Boardnamics Bearing Spacers
Most balanced 8" tire I’ve ever ridden
Tubes are slimed
2 hubs have longer m4 bolts for the 4GS adapter
Bearings have loctite in the bearing seat to prevent clicking
Less than 50 miles on the wheels. In brand new condition.
SOLD:
Item 4 (Drivetrain) SOLD
-NewBee 55/11 4GS Gear Drive
-SKP/Reacher 6485 151kv Motors:
All connections have loctite and gear assembly is greased
No scratches on motors or cases
Less than 50 miles on the drivetrain. In brand new condition.
SOLD:
Item 5 (VESC) SOLD
-MakerX D100s:
Used for less than 50 miles. No phase wires cut or resoldered. Worked great.
SOLD:
Item 6 (Remote) SOLD
Zmote
-Torch version. This is the fancy version with all the lights and battery telemetry.
-Remote battery included.
-Deadman switch deleted.
-Clear outside edge with black accent grip.
-No wireless charging.
-PWM mode.
-PH2.0MM JST (plug and play w/ MakerX D100S).
-Shrink wrap removed and covered in electrical tape instead.
SOLD:
All prices are OBO! May offer discounts if multiple parts are bundled together in a single purchase.