Hey Y’all
Got some parts for sale. Located in the Germany. Shipping prefered in the EU but International (US etc.) is possible if you cover the “higher” shipping. Buyer pays for shipping.
If i find anything else, it will be added.
SOLD STUFF
SOLD 1 MBS Matrix 2 Truck. Comes with either RED or Orange Shockblocks. 65€
A bit dirty but gets a good cleaning before shipping. Only visible damage is the small scrape (see pictures) Excuse the bad pictures, because its still mounted. No broken baseplate.
1 single Abec Wheel pulley 36T 20€
Used for roughly 25km
Material: aluminum anodized black
Profile: HTD5M
Width: for 15mm wide belts
Number of teeth: 36
Bolts: 6x M5 stainless steel
2 Abec Clones 90mm (Came with the Wowgo 2s) 15€ -
Roughly 100km. Slight damage (see pictures)
2x 15mm 15T Motor pulleys for FREE**
Used for about 50km, else they work perfectly fine.
**
Modded Gt2B with MasterCho(?) case. 25€
Comes with Remote and Adjustable Lanyard.
Receiver
PWM cable, Micro usb cable and the Antenna Tube.
The remote has some hotglue residue left on the top where a bell was attached. I’llntry to get it cleaned as much as possible.
Some minor scratches/dings here and there.
Paris style Truck (Came with the Wowgo 2s) 10€
WHat can i say. Its a truck. Used like the wheels for about 100km. (Nuts included)
Wowgo 2s [AT] Remote also found on the Wowgo 3/3x 45€
Used twice. I bought it because i had connection issues but it was the ESC’s fault, not the Remote.
“Random” Baseplate. Baseplate came from more old Koowheel board. Free
(I have another one, complete with the truck but the axle is bent a bit, so if needed i can salvage the baseplate too)
**MISC
A 3d printed Nut tool for 12mm nuts (mbs matrix for example).
Works best if you put an allen key through it acting as a lever. Free for who wants it.
I’m not in a rush