Selling Flipsky dual 6.6. Never used riding. Got it new and was planning on using it as a backup ESC, but don’t see any point in keeping it around anymore.
I soldered 10 AWG phase wire extenders and 5.5mm male bullet connectors onto it.
I also soldered a male xt90 connecter to power supply.
I had originally cut the PPM harness wired midway to use the connector for a different project. I ordered a new connector and fixed this, though.
All of the solder joints are very solid. I used marine grade heatshrink to seal the joints.
Price-$200 ($175 without the modifications I made to it).
Will work with you to figure out the shipping/cost and whatnot.
It’s not the flipsky paypal claim one. I’m sending that one back to Flipsky. I wouldn’t screw anyone over like that.
I got this one new but didn’t want to put the time in to program it correctly.
Even thought it’s a dual, I believe you are supposed to program each side separately and make sure to set a master and slave side. PPM harness works on this one