Used but in good condition
I replaced the sensor wires (quite badly) around 50 miles ago which could be redone but they still work fine
Motors spin without any problems but there is a bit of glue on the ends of the phase wires
Comes with 15t pulleys
They are in virtually perfect condition except and look perfect also
I have have had no problems with overheating or lack of torque either
1 for £37.5 plus shipping
Take both for £70 plus shipping
This includes 2 motor pulleys
Shipping from uk
Hey bud, these motors are not perfect, they are a disaster.
Rethink this one.
13 Likes
why in terms of if they work they are fine
only problem is the sensor cables looks
to fix the sensors up is a 5 min job
Dareno
March 30, 2020, 6:41pm
#4
If its a 5 min job then why do they look like that?
Rethink the description please Shua.
You seem to be having some fun lately little man.
5 Likes
the problem is all looks they work fine and have been used for the last 50 miles like this
what do you think there worth
Isnt this the board you did 100 miles on last week?
4 Likes
replaced these a couple weeks back no issues whatsoever
and the 100miles last week was slightly longer then a week and was mainly to shut whathisname up
Dareno
March 30, 2020, 6:50pm
#10
The problem you have is whether such blatant mistakes have done some damage. Sensor pcbs are typically prone to damage so if i were you I would clean up the wiring and then test the motors on the tool to convince the prospective buyer that they are indeed perfect. Otherwise its a fools lottery.
They are very far from perfect condition.
2 Likes
thing is i dont have any shrink wrap so the glue is my shrink wrap
i can show a video of them detecting on the vesc tool if anyone wants
Im sorry bro. I love to back ya up and all, but those things look like they have seen more then 50 miles. Also "good condition " is not how anyone would describe them. Used well would be better.
5 Likes
nah 50 miles on those new sensors
as in i have done 50 miles since i replaced the sensor wires
Dude these motors are 60USD a piece from flipsky.
5 Likes
moon
March 30, 2020, 6:55pm
#15
50% retail usually.
But it looks like theres a rat inside your house and is chomping on your wires
3 Likes
plus shipping and VAT from flipsky which will easily total like 90usd a piece
lowered the price slightly
Video of motors working with hall sensors
Didn’t use canbus cause my VESC tool always crashes and acts like a spazz when I do
Anyone with offers please send
Thanks