Hello.
Back in June 2016 i got this idea I wanted to make a Trampa Mountain board.
So I did, however after assembly it has remained unused in my walk in closet, and I have finally reached the point where I should probably try and sell this.
Parts:
35º Long TRAMPA deck, see link for details, its still up on their site
Configured as follows
17 ply, very stiff.
Green dampas 75a firm steering
Trampa chain drive kit V2, gearing 11:50, note that the gearing in the link is different from this build, from e-toxx.de.
https://www.e-toxx-shop.com/trampa/mtb/chain-drive/black-chaindrive-cf-braces/#cc-m-product-9939789470
Battery box is a 309 drybox from ebay, and i bought some cable glands to wire the 8AWG wires through so it could remain sealed against water.
Motor x2 are APS6374 240 KV 3200W from Alien power system, see link below
Battery x2 Zippy Lipo 8000 mAh 30C 4s1P see link
Esc x2 Hobbywing MAX6 see link below for details, at the time sold by rc-toy.de
http://www.hobbywing.com/goods.php?id=410
RC Controller from Aliexpress.com
https://www.aliexpress.com/item/32607181070.html
And some XT90 connectors.
Batteries are wired in series for 8s1p
Also the battery box could most likely fit 2 more batteries and I have some bubble wrap in the box with the batteries to reduce how much they can rattle around
I would like to get 800€.
Shipping to UK/DE/FR is about 55€
If anyone would like more pictures let me know and I’ll be happy to provide.