WTS - Esk8 Parts Vault has re-opened, check it out 👀

[alankerr]

Hello Esk8 Addicts,

Nah, I’m not building another esk8 just yet .

Esk8 DYI Parts Vault is back open with stuff you may need.

Parts have been gathering dust that I’m prolly not going to use em. Some of you have been searching for some 3dservisas stuff, well here you go!

All items include Shipping within CONUSA

**Fluxmotion AT1 “Cherry Bomb” Deck. I dressed the deck in red carbon fiber and “cherry bomb” artwork. It has a (18s6p) LG MJ1 INR 18650 3500mAh 3.7V High-Drain 10A (Li-ion) battery (re-built by myself). Daly Smart Bms. Flipsky 75100 Dual Vesc controller. Heat sink. Includes Flipsky vx3 remote. Flipsky Bluetooth. External ready Connectors on enclosure for lights, mr30, hall sensor, DavegaX/Megan - $300 for deck and everything in it. Comes with both remote charger and a 8amp 75.6v battery charger.

**3DServisas Black (Gen 1) Finality AT set. Gear Drive 8/40 (5:1) Black Trucks 20mm (trampa) profile comes with Gen1 and Gen 2 hubs $400.

**Mboards Esc enclosure - $30

9” Red Mudpluggers $60 for the set

9” CST 9/3.5-4.0 $60 for the set

**P.S. - everything is cheap AF so no haggling please

Thanks,

Alan

[yoyotinker]

DM’d for those BN adjustable baseplates.

[Ash]

dibs on the tomiboi enclosure if you’ll hold it till wednesday.

[alankerr]

Sounds good

[Davewesh]

What a pain in the ass. only back for a few weeks (not that I’ve been posting at all) and already I’m feeling the itch to spend some money.

Im going back and forth on both the TB40 and the Volo decks. On the one hand, I suspect the TB40 to be a smaller profile when assembled than the Volo since I’m assuming the Volo doesnt have a cut out.

In either case the build(s) these would be used in would be road/paths no AT aside from some grass/gravel here or there. Decisions, Decisions…

Question for you (or anyone really) would putting bindings (eg drilling mounting holes) on composite decks be a concern (tbh I cant imagine that it is, but figured Id ask regardless)?

Decks aside, I do have interest in a number of other parts so DM Sent

Edit: DM Sent for all of the 175mm/7" tires and the two (TB40 & Volo) decks with enclosures.

[alankerr]

Dropped price on one DD drive kit to $300

[alankerr]

Added a few items. Trumps ATB trucks, Apex Chain Drive, Flipsky 75100 and more…

[Ash]

bump, enclosure was received. just haven’t had a reason to open it yet lol

[Arzamenable]

Trucks and tires arrived. Perfect, thank you. Sent another DM about the flipshits and a spot in the chain gang.

[Jamiecady]

Whats the best you can do on either set of rubber airless wheels 105 or 110 shipped.

[alankerr]

Price is listed at more than 50% off of what it costs and lowest I feel comfortable with unfortunately. Shipping is about $10

I only used the Onsra for a max of 20 miles. I was testing out what I liked and kept buying wheels.

[Romanr86]

Interested in those bn baseplates if they’ve not been bought already. Does it work as a tkp or does it have to be used as a rkp?

[mc2prod]

@alankerr

FLIPSKY 75100 FOC 75V 200A Dual ESC with Aluminum PCB

I’d like to take both of em. do a slight discount for both? dm me. thx

[fujio001]

The bindings look very similar to the ones from summerboard.

[Ac53n]

Baseplates are specific to the hanger geometry theyre used to. Those BN plates are RKP only, and specifically caliber 2. You will not be able to run a tkp hanger on them.

[alankerr]

Price is not negotiable unfortunately. Went down as far as I could feel comfortable with before posting. Worth the price listed. Thanks for your interest though!

[mc2prod]

…but you’ll still sell them to me at stated price right?

[alankerr]

Bumpity bump. Added 20s6p battery

[mc2prod]

ESC’s received. Good Deal. Thank you!

[bearlyrecognized]

Hey what profile are those 3ds 5.1 drives for?
Thanks