WTS - Ca, US - APEX AIRS

[SirVesa]

I’ve finally come to terms with the fact that I will never use these parts on a build. Better to post here and give a good deal to someone who can put this stuff to use than let it sit around and take up space in the garage.

All prices are OBO and do not include shipping from California. I’d really like to see this stuff move so hopefully you see something you like!

SOLD Haero Apex Deck - $80

SOLD Trampa Bindings & Heel Straps $10 with Apex Deck

SOLD Four of Trampa Superstar Hubs with Primo Alpha 8” Tires & Tubes - $90

SOLD Mountainboard Front Duality Truck: Offset 300mm Hanger - $100

SOLD Stormcore 60D+ in Apex Enclosure - $150 Takes All

SOLD Sunkko 797DH Spot Welder - $20

SOLD 3D Servisas Aluminum Wedge Risers - $30

SOLD Flipsky 63100 Battle Hardened Motors @ 190Kv - $85 Plus Shipping for the Pair

SOLD Flipsky VX4 (original version) - $50

SOLD - Flipsky 11” DKP Trucks - FREE

SOLD - MakerX DV6 Pro in Newbee Enclosure - $100

SOLD - Trampa 66T Aluminum Pulley from their Pro Belt Drive - FREE

SOLD - Five Complete Trampa Hypa Hubs with Urban Treadz 6.5” Tires & Tubes - $50 took all

SOLD - Daly 18s Smart BMS - FREE

SOLD - Trampa 18 ply Big Boi deck with wings - $150

SOLD - Trampa 18 ply Big Boi deck with Wings - $100

SOLD - Apex Airs - $175

(USED) Apex Airs - $100 OBO for both trucks!

I have two used sets available

(NEW) Apex Airs - $175 OBO for both trucks

I have one new set.

There’s also a third set that needs kingpins which are easy to source from mcmastercarr. I’ll include a baseplate and hanger for free with the first two orders so you can have spare parts.

Any nuts not shown in the pictures WILL BE INCLUDED in the order. I’ll get new ones for you.

Images

• 
  
  
  
  

FREE STUFF!!!

-Trampa Washer Pad, Hail Satan Mod (because who doesn’t love the dark lord!?!?)

Images

• 

Trampa ESC Enclosure. Just pay shipping. We had to drill a power button hole in the side of the cover. Couldn’t do it in the top because of the ridges. The battery cable entrance holes are too small for #10 so we drilled new ones in the baseplate. TPU grommets to protect, I have the file. There are two countersunk bolts and washers missing for the cover. This thing is fucking small. It cooks your esc and interferes with remote signal due to being 100% aluminum. My buddy who had it was constantly overheating. First ride out for him on an @IDEA case today and temps were way lower. No throttling down. It’s probably a great case if it’s free!

Images

[Dnollie]

Goddamn dude you’re too generous!!

[fessyfoo]

@Dnollie

Goddamn dude you’re too generous!!

cut to 5 years later.. @Dnollie’s post in the same vein.

[Dnollie]

The difference between the 2 of us is that he is just a really kind guy who wants to give back to the community, while I just want to recuperate some funds so I can build more esk8’s

[glyphiks]

@Dnollie

The difference

@fessyfoo

5 years

@SirVesa

in the garage

Gotta read between the lines

[SirVesa]

I think everything is priced fairly for used condition. It has zero value to me so why try to overprice it?

Deck, bindings and most of the free Trampa stuff sold!

[SirVesa]

Bump - Added a USED Stormcore 60D+ in an Apex enclosure FOR SALE and a washer pad FOR FREE. All prices are OBO!

[HighZenBurg]

I’ll take the Stormcore and the rubber riser!

[SirVesa]

Someone else DMd about the Stormcore and enclosure right after posting! Will let you know if it falls through. Edit - I can still send you the risers for cost of shipping.

[SirVesa]

Update - Added a 300mm front MTB Duality truck. The Stormcore 60D+ & 3d Servisas wedge risers are in limbo but I should know if they’ve sold tomorrow.

[ep201]

Spot welder still available?

[SirVesa]

Sure is.

[SirVesa]

Update - Stormcore 60D+ in Apex Enclosure and the Front Duality Truck have both sold. Spot Welder has sold. Everything else that’s listed is still available.

[SirVesa]

Sunday Bump Day! Added some good stuff. Basically gutting this board and selling most of the parts. Everything has been added to the first post. Check it out and let me know if there’s anything that you could use!

Side note - any funds generated will go towards making the final version of my SLM herringbone drives a reality. The batch I had made earlier this year on the Double Agent build are still running great but some major QOL improvements, including reduced cost, have been made on the (hopefully) final design. Once they’re proven, the files will be posted for all to use!

[SirVesa]

Wedge risers sold!

[SirVesa]

Flipsky 63100 motors sold (for less than asking). Moved Flipsky DKPs with motor mounts to the free section!

[Mtb]

If the apex airs are still available and you’d post them to the UK I’d be interested

[SirVesa]

They are available. I can see what it would take to ship them to the UK. It will be like sending them home… DM me your address and I’ll try to get a quote today.

[SirVesa]

Airs sold!

[HighZenBurg]

Got the wedge risers wit dat funky gunk. Thanks for the additional rubber risers and fast shipping!