So I was out for a ride and about 15 minutes in the left motor goes full power for about a quarter of a second, full brake for a quarter of a second, then just off. I then limped the board home on one motor. I am running a flipshit 6.6 and torqueboards 6355 motors on 10s. All 4 lights light up when powered on. I ran motor detection and got this (see pic). Does anyone know what this is caused by?
Motor max: 80
Motor min: -60
Battery max: 60
Battery min: -17
Are your motor cable connections solid?
1 Like
Yes, and no visible damage to any of the wires.
2 Likes
1466mΩ is way too high.
Take the motor off and try the hand test
What is the result? Does it fail step 7?
1 Like
Weird! Take apart the motor phase leads and short two of them together and give the motor a hand spin to see if there is any resistance.
Also noticed that that motor didnt pass sensor detection, maybe sensor wires shorted somehow?