@ATC might have some.
I also have a shit ton of belts, I might have the length you need.
How about here @NingNing selling some good stuff !?
Also as stated above. @ATC mounts have been rock solid for me.
2 Likes
Oh shit I totally forgot about ATC, I’m picking up pulleys from NingNing anyway so I’mma PM him first
Thanks for the reminder!
2 Likes
Damn that’s nice looking…what motors are those?
1 Like
I’ve got 2 boardnamics mounts that I can sell
2 Likes
I tried on a 19x3 uni and it didn’t exactly work well by any means
Any loose sand was impossible to get through, and only super wet sand I could ride on top of
1 Like
Oof…would dualies just sink? They should behave like a 8x4 right?
1 Like
Hi Zach,
I have just recently developed these motor mounts for the Matrix 2 trucks. They might be out of your price range but I thought I’d mention it anyway.
The motor plates are made from aerospace grade 7075-T6 aluminium, which is around double the strength of whats already considered a high grade 6061-T6 aluminium. The stuff is like steel.
I focused a lot on weight reduction for this design to improve board handling, and because of this the mounts require a cross bar (threaded rod for example). They fix to the truck hangar using 4 high tensile grub screws which push against stainless steel insert plates that spread the force and prevent damage to the soft aluminium hangar which can cause mounts to loosen over time. There are some other features such as a slight bump to protect the motors from scratches, small slots to aid in motor cooling, a reversed nut and bolt arrangement, which allows the motor plate angle to be adjusted without removing the wheel, and if you snap a bolt from over tightening it can be easily removed unlike some other mounts which require the bolt to be drilled out (been there, not fun).
I can offer these with all required high tensile steel bolts for $160 AUD for a set of 2 motor mounts, plus shipping from australia. Lead time is currently 2 weeks as they are made to order. I also offer a similar design for caliber 2 and fatboy trucks 
5 Likes
Holy shit those are sexy…! 
I think that its a little on the higher price end but I fuckin’ wish I could buy those man…they are just beautiful
1 Like
Thank you! Whats your country/state/zip code dude? I’ll see what I can do on the price
1 Like
USA/Delaware/19711
I appreciate the consideration although I think $160 is a bit steep for this build even if shipping from Australia isn’t as horrific as I remember it being 
160AUD = ~100USD btw
2 Likes
Oh shit, I thought it was the other way around…now I’m interested
1 Like
Haha all good, I’ll do a deal on shipping (corona special) $20 AUD, so total $180 AUD which will probably end up around $115 USD with our stupid exchange rate. PM me if you’re interested
2 Likes
I got a solids discussion in the morning so I’mma pass out now, but I definitely will tomorrow!
1 Like
Ready and in stock, 3 days shipping to the US
Now with 15% corona discount
1 Like
Alan got me hooked up with mounts and I have some belts that will just fit from an old purchase, so this thread can be closed… @mmaner this parts your specialty right?
P.S. @Tony_Stark I really appreciate your offer on those mounts but with shipping the way it is rn we decided something localish would be best
2 Likes