(WTB) Psychotiller press-fit motor mount for SR RKP

Anyone have a spare that I could buy? I’d like to convert my single drive to a dual drive. Build thread here. The motor mount is working really well, so I’d like to use the same thing on the other side.

I’m pretty sure that the latest PT clamps were compatible with both 176mm & 200mm hangers. My front truck is a 200mm hanger and the rear is a 176mm so that I can fully support the wheel pulley on the axle.

I’ve tried getting in touch with Psychotiller via PM and IG, but I’m not having any luck. Hoping someone here might be able to help me out.


1 Like

Bumpity bump

I believe @Psychotiller has don’t away with the SR rkp mounts may have some laying around.


I have a set


Thanks @CiscoV for offering your set. Turns the ones @CiscoV has are a slightly different version, so I’m not confident that they will work. Here are some measurements of the one I have in case anyone out there might have a spare.

Outside diameter ~52mm:

Bolt spacing ~16mm on-center:


I might be interested if you still have these?


I still have them Pm me brother

1 Like