a plastic dead-blow hammer
pinesol that sit is an amazing de-greaser… and cheap as fcuk…
- drain it thru a paint filter and re-use it…
1 Like
The old bearings outer ring (if you have trouble with tight recessed bearing holes it may be necessary to cut the old outer ring beforehand to get it out agin) and a vise/press in an emergency some piece of hardwood and a hammer does also work.
The important thing is to get the bearing straight in and to load the ring instead of the balls when pressing berings on anything.
1 Like
The Carvon bearings were easy-peasy to swap… I used appropriately sized sockets to push the bearings out and reinstall them…
The important part is started above… Only press/hammer/or drift on the outher ring…
3 Likes
Probably their keyboard does not have a dot button working on it
1 Like
Is a torque wrench overkill if you have loctite and wera hex keys?
1 Like
This is what I ride with. If I’m taking an AT board out I usually bring an electric pump and spare tube as well.
Fits in this nice little bag @Skunk shipped some shit to me in. Thanks skunk!
6 Likes
No crusty syringe?
1 Like
Give that tool a bath lol
2 Likes
@BillGordon please don’t tell me you are comparing legal marijuana to heroin…
@Brently I like it dirty. hurts the chest a little more 
1 Like
3 Likes
Oh… haha
Apologies… years of arguing and debating literally dozens of people for the past 15 years has scarred me… i also have a disdain for needle drugs for personal reasons. Carry on with your HUMOR (correct spelling)
1 Like
Queen’s English here, my good lad.
Oh i know… that was my lame attempt at humour
1 Like
Savage 
1 Like
What a handsome tool bag you have. 
What kind of portable electric pump do you have? I was looking at one of those Xiaomi pumps on Aliexpress, but kind of leary since I haven’t found much about people’s experiences with it.
1 Like
this is what I have:
I’ve recently noticed it doesn’t pump as hard as it used too, especially with stiff sidewall tires. Under 35psi is fine still and it used to pump up to 55 on a full charge but not anymore. -_-
I might actually switch to a nice compact hand pump with a high gauge or CO2 pump.
1 Like
CO2 leaks out of tubes very fast btw.
1 Like
ok not one of those then thank you, didn’t know that!
I was pissed too man - I bought a bike pump off AMZ that was the perfect size and had a read out but my dumb ass didn’t zoom in enough to the product image to see that the gauge only went to 25 PSI 