You are dangerous to all of us dude. When you burn your parents home down we all look bad on the news.
Imagine the story. āTeenager attemps to build dangerous DIY skateboard in his room, threatens his family in infernoā
This isnāt a game, you are building something that can KILL people. Do some god damn research.
now i understand why we piss yāall of so much. i will now go back to my hole and hide.
Thereās no āweā here. Age does not lump you in with ignorance my friend.
Young people can be patient and researched too.
sorry.
back to my hole I go 
Actually I have XT90s as my main switch and the switch from the vesc.
I have that, because no one can do bullshit with my board without me.
@Halbj613 Please, for the love of god, donāt stand on the line.
I made battery for @Halbj613
Battery has D596 with e-switch (led button), there is no additional anti spark switch. Connector to vesc is normal xt90. There are two charging ports, both fused. One is xt60 with thicker wires for his 8amp charger, another port is standard 5.5x2.1mm for lower amp charging.
I told you @Halbj613 that you donāt need any anti spark switch, because D596 bms has on/off switch. Only thing you are missing now is Y xt90 to connect both vesc with battery. And thats it.
Sorry thank you for confirming with me just I am getting very confused about the whole thing
Does anyone have a y splitter which I could use
and the best part is, I could make you xt90 splitter for vesc, but you said you ordered one (and you obviously did, but wrong one)
All you had to say was you had a bms with built in switchā¦
Itās hard to help when you donāt know what you got.
sorry i was just gtting cnfused because i remebered me talking to him about i but i couldnt remember what exactly he said
All good dude. Keep notes or somthing. Its good to know why you need a switch. Its more than just to turn it on and off
K thanks I am getting @Acido to help me with a couple of soldering parts and making a splitter
lmao, reading all of this just now.
in my mind, he had a switch like this XD
glad you guys got that sorted
Same here. Thatās exactly what i was thinking.
[US] Whose got a couple of the short nuts for kingpins/10mm axles?
FWIW, I could not imagine building a board without being able to solder. Iāve soldered before, but building a board forced me to really hone this skill. I highly recommend you learn how to solder well. Cheers
At this point you just buy a board off a shelf.
Does anyone have two 63xx 190kv motors they are willing to part with im not picky . just trying to get atleast one of my boards functional. Even if they are old and ugly. Just need them to work.
All I can find is 12v fuses. Would probably workā¦
As I know fuses are rated for amps and not volts
Well maybe the plastic around is rated for 12v but it should not have any problems with 50ā¦