Haha no, not yet, I was actually just turning it on and Kaboom!
It was with the baby 5055
Looks like your starting early for secret Santa. If I get you Iām going to make you a board that is just a beard
4 Likes
That would be epic!
1 Like
Looking for some of those 35Ā° risers that cost a reasonable amount.
edit: motors are sold.
Looking for a CANBUS cable, NY, USA
Let me know!
I want the 180kv please, how much are you looking to get, I need 1 more to make my board dual.
Shipped to San Diego, CA 92127
Anyone have 3 new samsung 30Q?
I must have gotten some bad ones with my last order cause 3 came dead.
It would be greatly appreciated if someone could help me out.
1 Like
I tried to contact Nkon but there deffinitly done with dealing with the US
looking for cheap mountain board complete as in trucks wheels and deck something like this https://www.amazon.com/MBS-10101-Colt-90-Mountainboard/dp/B0157CSIAY/ref=sr_1_13?dchild=1&keywords=mountain+board&qid=1569890367&sr=8-13
if no one has this or something like it ill just buy from amazon
1 Like
Iāve seen them used on Facebook market place for anywhere from $50 to -$150.
1 Like
You donāt want those trucks though. Youāre better off finding the deck for ~$100 and buying some maytech clone 16" spring trucks.
2 Likes
You DONT want those trucks though.
To be fair they were great until they snapped. I was jumping them and offroading heavily but am only 150 lbs so I canāt recommend them anymore.
3 Likes
how much did your first mountain board cost you?
I actually started with that same board as a base. I loved it but when I was experienced enough to know the difference between a āhybrid AT boardā and a real mountainboard, it was no longer an option.
-
That deck is tipped at 20 degree nose and tail. MTB trucks need 30-35 degree tips.
-
Those trucks are more skateboard trucks than mountainboard trucks. They were fine on road and light offroad but couldnāt handle heavy riding (see above carnage).
You can see my history in that thread but long story short:
I bought Matrix 2 mtb trucks and they didnāt work well with the colt 90 deck angle. Turning was terrible. I bought the markone B stock deck to try out the correct deck tip angles and turning was greatly improved. The deck is too narrow and I bought an MBS Pro 97 - DW2 deck to ultimately replace it with.
So are you asking how much it cost to get to a rideable point on a board that was ok? About $1200.
How much it would be if I was doing everything right from the start? Closer to $1800-2000 range.
3 Likes
[US] Does anyone have some bindings they donāt want? Kinda interested in using them on a analog longboard for jumping on curbs. Size 8.5 US, low profile preferable
Anyone have some vesc hall sensors adapter?
Learn to ollie 
2 Likes
Hey shut up Iām legit practicing my hardest right now to learn haha.
Realized the longboard wheels on a popsicle deck recovered from the lake last spring wasnāt ideal eitherā¦
Bought a $10 Tony hawk board on Craigslist hahaha I will be at the x games in no time
5 Likes