what is alternative? I mean I find than evolve Phaze Remote seems good, but works only with evolve boards. After I find this one, but yes, if it is with cutouts, it is a problem =(
hoyt puck
flipsky vx4
Magnet or potentiometer… This is the question…
Also about cutouts. I find this receiver with antenna, if it will be nice? and if it will work with makerX GO-FOC D75? this
While people have had troubles, alot havn’t. I’ve been running the wand successfully on 3/3 boards for atleast 2-3 years now.
If I’m not misstaken most of the cutouts boiled down to hiding the reciever in a faradays cage?
I’m pretty sure it was the water in the hot glue. Very detrimental to signal integrity
Aha… additional 5$ for VESC-Tool Mobile app ?
seems like I need full FAQ
FAQ
- Need to install VESC-Tool Mobile app from App store (5$)
- Need to connect phone with receiver by bluetooth (“Connect” button)
- “Vesc Remote quick pair” button (need to turn on the wand)
But I still have problem (I use 2S Ryobi batteries) with MakerX ESC, I already asked from manufacturer what is it (do not started from 0rpm, I need to spin the wheel for some speed first)