Vesc dead or motor dead ?

Esk8 Electronics Guides, Support, & General Questions
#1

Screenshot_2023-08-23-14-06-07-445_vedder.vesctool
Screenshot_2023-08-23-14-06-07-445_vedder.vesctool1080×2400 236 KB

Screenshot_2023-08-23-14-06-02-653_vedder.vesctool
Screenshot_2023-08-23-14-06-02-653_vedder.vesctool1080×2400 230 KB

Screenshot_2023-08-23-14-05-54-595_vedder.vesctool
Screenshot_2023-08-23-14-05-54-595_vedder.vesctool1080×2400 228 KB

It’s cogging

#2

When DRV reports an error, I usually check the MOS tube (there is a high probability that it is a problem with the MOS tube). If there is no problem with the MOS tube, I will check the current sampling again.