[USA Portland OR] DIY Tomiboi urban carver

[Tomei240]

Local pickup only around Portland area. $2200 firm, no trades.

Selling my complete DIY masterpiece. Just finished a few months ago. Over $3200 invested, not including extra parts. Motors, gear drives and remote are pretty much brand new.

Deck: Tomiboi 41.5" MTB, carbon bottom layer, extra stiff, custom made extra wide, coarse grip.

Enclosure: Tomiboi non-segmented single stack

Truck hangers: Moon Luna 350, 12mm axles

Truck baseplates: Radium 20* front, Moon 0* rear

Anti-sink plates: Radium X plates

Wheels: Newbee Pentagram V2, blue

Tires: Meepo Cyclone 165mm tires/tubes

Motors: Skyart Power 6485 173kv

Drive: Newbee 4GS 4:1 2023 version

Battery: Skyart Power 12s4p p42a/smart BMS

ESC: Stormcore 60D+

Remote: Zmote dual trigger with LEDs. Also including Hoyt puck in batwing XL case.

Extras: Charger, Skyart 170mm tires/tubes, crapton of different Riptide bushings, extra 12mm bearings, low profile wedge risers.
‐------------------------------------------------------------------------

Pics show board with 2022 Newbee 4GS 5:1/FS 6374 motors. Will update pics soon showing current setup.

Will also include any and all other esk8 parts I have. Some of these parts include a Psychotiller Recoil 40" drop through deck with enclosure mounted, Newbee 5:1 gear drives, TB110 92a wheels, assorted bearings, angled risers, Skyart Power 170mm tires/tubes, 2 Flipsky 6374 motors, 2 BN 6384 motors, extra Moon baseplates i think, probably some other stuff.

[jack.luis]

Damn you should join our Portland Esk8 group!

GLWS

[Shadowfax]

Dang, this is a nice looking build. Why are you selling it?

GLWS

[Tomei240]

Right on. How do I join this group?

[Tomei240]

Thanks man. Looks like work is going to be having shutdowns for at least the next 5 months so I will be losing a lot of hours.

[Savage1]

Just sell that nice refrigerator and get a cheap one from craigslist, and all will be good.
(sorry to hear that, nice board)

[BallisticBullocks]

fuck that’s a nice board

[rafaelinmissouri]

This is super nice.
Sorry you have to let it go.
Good luck.

[Tomei240]

I’ve been gone for a while, sorry. Still up for sale. Will throw in a Psychotiller Recoil deck and probably most of my spare parts as well.

[jack.luis]

@BenjaminF would Liam be interested?

[Tomei240]

Bumpity. Make offer

[Ash]

has it sold yet? if you think about parting out the board, i’m interested in the rims and gear drives.

[Tomei240]

Not interested in parting right now. I am off work on FMLA due to a mystery illness currently and need to be able to pay my mortgage.

Dropped price by $300 and added probably another $800 worth of free parts.

I now will include any and all other esk8 parts I have. Some of these parts include a Psychotiller Recoil 40" drop through deck with enclosure mounted, Newbee 5:1 gear drives, TB110 92a wheels, assorted bearings, angled risers, Skyart Power 170mm tires/tubes, 2 Flipsky 6374 motors, 2 BN 6384 motors, extra Moon baseplates i think, probably some other stuff.

[Ash]

gotcha, i ended up going a different route anyways. glws, and hope you get well soon