[US] WTS kWeld Spot Welder with Extras
kWeld Spot Welder with Extras
This kWeld was purchased directly from 18650 Heat Shrink & Cell Holders INC in June of 2021. It sat unassembled until I completed enough research to start my first build – including the battery pack.
In April of 2022, I assembled the kWeld and used it to successfully spot weld my 10S4P battery without any issues (0.2mm nickel).
Initially I thought I would be using the kWeld for multiple builds, but sadly, that’s not the case. I’ve built one board and I don’t see myself building anymore. I simply don’t ride enough.
With that said, I’d like to offer this “almost new” kWeld for sale here in hopes that another builder can put it to good use.
This kWeld comes with the following:
-
kWeld (seriel number F01580DE)
-
3D printed electrode holder
-
3D printed housing
-
Acrylic House from kWeld (assembled)
-
Extra kWeld fuse
-
kWeld program module (currently running 3.0)
-
kWeld electrode replacement set
-
Turnigy Graphene 5.0 Lipo Battery (11.1V 3S 75C-Discharge)
-
Hobby King LiPo Fire Retardant Battery Bag
-
Turnigy E3 Compact Charger
Please note the following:
-
The electrodes and foot pedal will have to be reattached to the kWeld. They were disconnected for shipping (see last photograph)
-
The foot pedal will require a jeweler’s screwdriver (7/64 slotted)
-
This acrylic housing was assembled using the recommend glue. It’s not the prettiest glue job, but it’s certainly solid.
-
This is being sold as a complete lot. Items will not be separated.
-
For a shipping estimate, please use the dimensions 15” x 15” x 10” and 15lbs 13oz for the weight.
-
Domestic U.S. Shipping only.
$250.00 USD plus actual shipping cost:
If you have any questions, don’t hesitate to contact me. Thanks and take care.
Images
- upload pictures here
