Moving parts acquired through the years that are not used in my current builds. Hope to pass it on to aspiring (or established) builders. Located in the US, SoCal. Buyer agrees to pay Paypal/Venmo fees and shipping. Thank you for viewing!
A pair of Boardnamics 6384 190kV motors
- Boardnamics branded Flipsky 6384s, wear and tear from road debris and some galvanic marks on the contact points with motor mount but rolls free and quiet. Sensors work well. Fantastic powerful motors.
- 8mm round shaft with keyway, keys installed.
- Will throw in a new-ish pair of Boardnamics 18T steel pulleys for 15mm belts.
Price (USD): $150 for the pair of motors and pulleys.
Torqueboards V7 Motor Mount Set and matching idlers
- Mounted but never ridden. Extra-long motor mounts with C-C distance 103 to 121 mm. This is the unique feature of TB’s mounts; if you need long motor mounts due to motor-truck interference, nobody makes longer mounts that is not custom. But these have some compatibility issues as below.
- I recommend using this with TB’s own 218mm Trucks due to their proprietary hanger profile. Their website writes the height of the TB 218mm trucks are about 1mm taller than Caliber II trucks, and their motor mounts made to fit their trucks. You may be able to use with standard Caliber II trucks if you shim appropriately, but I haven’t tried. The max motor size if using the TB’s 218mm trucks is 6374.
- Also note that the mounts have lips on the inside surface that mates with Flipsky motor faceplates. They interfere with some motors that have flat faceplates such as Reachers.
Price (USD): $50. Bought new from them this kit would cost about $100 + shipping.
Orangatang Caguamas in 77a
- Iconic 85mm thanes in the softest duro offered, 77a. Mates with Kegel pulleys.
- Zealous 8mm bearings with integral spacer installed.
- Some smudges from handling and storing but never ridden.
Price (USD): $60
