Have fund two small issues with the LapMonitor.
I put it at a sharp hairpin and it began to skip laps. In the manual LapMonitor says the transponder needs to be horizontal.
I had the transponder mounted under the deck. Doing the sharp hairpin the deck tilts to much, and the lap counter doesn’t count every pass.
I moved theLap counter a few meters away from the hairpin and it worked flawlessly again, as the deck didn’t tilt anymore.
The other thing is that it is best if the lap counter have its back to the sun. With the sun facing directly into the lap counter it also sometimes misses a lap.
