Lystin Bike Handlebar Extender, Aluminum Alloy Bicycle Handlebar Extension Double Clamp Bike Bracket Bicycle Accessories for Holding Flashlight Speedometer GPS Phone Mount Holder https://www.amazon.com/dp/B07YLMN1B7/ref=cm_sw_r_fm_apa_fabc_9XO3FbNEKH17J?_encoding=UTF8&psc=1
oEdRo LED Light Bar 2pcs 6 Inch 18W LED Work Light Off Road Lights Car Boat Lights Fog Driving Light Lamp Compatible for UTE SUV 4X4 4WD ATV Jeep 3 Years Warranty (Spot Fog Lamp) https://www.amazon.com/dp/B07DQL6M6T/ref=cm_sw_r_fm_apa_fabc_MYO3FbDFSM19P?_encoding=UTF8&psc=1
Nilight - 90027B 2PCS LED Light Bar Horizontal Bar Clamp Mounting Kit Fit on 0.75" 1" 1.25" Bull Bars Roof Racks Roll Cages for ATV UTV and Trucks, 2 Years Warranty https://www.amazon.com/dp/B07TNH72SG/ref=cm_sw_r_fm_apa_fabc_dXO3FbFNSGT75?_encoding=UTF8&psc=1
I got a ton of stuff from Amazon
Looks really good man! Very slick!
Thanks man!
What external antenna are you using? I need that for my build
2.4ghz WiFi Antenna 2dbi SMA Male (Pin) Connector with Mini PCI U.FL to SMA Female WiFi Pigtail RF1.13 Cable 15cm(Pack of 2) https://www.amazon.com/dp/B07D1Z3W7T/ref=cm_sw_r_fm_apa_fabc_8yS3Fb7F6NGRQ?_encoding=UTF8&psc=1
I’m sure you probably already know. But don’t let the antenna touch anything conductive (metal, carbon fiber.) I made that mistake and one was smoking during motor detection…the one connected to the Metr BLE. I drilled out larger holes, and used some plastic/epoxy for backing. And mounted them directly in the center of the larger holes. So now there is zero contact with the enclosure. I’m saying this, cuz I peeped your build with the metal enclosure. Nice work man. Very creative and different. 
Pretty dope build, the camo reminds me of the camo on my SR-71 Bluebird build, but yours looks really slick with the frit
@ShutterShock Thanks. I took forever to finish it. I did the skin way back in July. I hadn’t seen this anywhere, as far as I know.
🖼 Pictures and Nothing Else!
HAHA dude you just saved me. That’s exactly the info I needed to know, thanks !
Ya I finished my build somewhere in June I think. I’ve got gray navy camo on my griptape. I wanted to do frit and something more complicated like yours but decided I didn’t want to spend that much more time on it
@ShutterShock If you decide to skin in the future, and also frit. Get the surface roughed up, then lay down some good white primer. It will make the camo pop. I had to strip off my 1st attempt, because the logo was showing through. It’s actually a pretty forgiving process, cuz you can sand between coats. Regarding cost $$$…You can get all the materials for around $100. BTW, I hit up @Sender for advice. He is the master of this stuff.
Yah believe me I have seen his work haha it’s great. My hummie is just carbon fiber so no logo on it
Oh wow! Stealing it right now. Will have hard time selecting just 4 pics. @SoCalLA, may I? (https://davega.eu/gallery/awesome-builds)
Absolutely, go for it!
I know there is a wait list, and I can understand why. But I have a new build, which is better than this one… ready for a Davega. Do you have anything ready to ship? I can PayPal you friends and family now. I am running Focbox Unity, and could use blue or black. Also, I will have better pics for you this time.
I could only give you one with a raw housing now. If you wanted black or red you’ll need to wait for about a month.
@SoCalLA – Are you still active on this forum?
Just so happens I purchased this board from a local guy in my area. Its cold outside, but I can’t wait to hop on this and really get to know it.
Your work is top notch!
Sorry for the late reply. I haven’t been checking in. But I will moving forward. Let me know how it turns out. Or if you have any questions.
I sent you over a message to your inbox.
I wanted to find out more info related to the potential external battery you mentioned.
How was that planned to play out?