Spintend Ubox 75/200 dual motor controller / The budget high voltage esc alternative?!

[stratoglide]

The seller sent me a MSG regarding cutouts that happened at high amp draws. Supposedly it’s solved through replacing a diode. They gave me the option of a partial refund and to send me the replacement diode or to ship it back and have the diode replaced at their cost.

They have been super responsive and seem to offer good customer service but as with any new Vesc there always seems to be small hiccups along the way. As long as the company is willing to address them properly and take responsibility for their mistakes I’m happy.

[Andy87]

Let me link this thread here as well as it may answer many questions:

Spintend 75V/200A Ubox and Uni1 Introduction !

Hi guys Good weekend! My name is John Lee, finally I’m here to introduce my products,( Ubox 75V/200A Dual Motor Controller based on 75V/300A VESC)and Remote Uni1. [Ubox & Unibox the best partner for fullfill VESC features] Firstly , simply introduce my background. I’m an electronic software engineer with 15 years of work experience in FPV field. And I noticed VESC in early time. It’s powerful and charming. I spent long time on it since 2018. (I was busy with living by providing firmware to s…

[hardunclejohn]

yes, it’s fixed now. we only shipped several pc out, all fixed.

[hardunclejohn]

thank you!

[Tailele]

Please…
Anyone could give me a wirong diagram? Because i don t know how connect the cable of my e-bike…i must connect the brave for regeneration, the gas handle that isn t bluethoot and if It Is possibile a botton for disabile and enable the two motors…thanks a lot

[Unnenoob]

They lock great and are exactly what I’ve been looking for. Does anyone know of a European seller. I haven’t been able to find any

[longhairedboy]

Welcome to the forum @Unnenoob !

[Skyart]

These are very new on the market, as far as I know only seller is in China. But shipping was pretty quick to US.

[Lee_Wright]

Here we go again

Spintned Ubox Dual High Voltage ESC - Whats inside?

[pixelsilva]

‘VESC’

…Ok, ok Frank … “Ubox”

[Fosterqc]

The double VESC part has me dying

[pixelsilva]

@Lee_Wright your thick brit accent sounds to me like ‘Vendetta’ (when you mentioned Ben Vedder). Funny considering this whole Trademark™ issue is all about a single stupid letter V

Great Spitend review, as always

[pixelsilva]

[rey8801]

I am on Europe and got it in less than 2 weeks. You can order from their website

[jonisingt35r]

Are the cut outs now fixed?
And is the feedback good on these?

[BillGordon]

Hey all-

Make sure you are running the custom firmware listed on Spintend’s site:

https://spintend.com/products/75v-200a-dual-motor-controller-ubox-based-on-vesc (bottom of page).

The stock 75/300 may not be ideal for all remote types.

[Halbj613]

For their remote it’s ok?

[b264]

We could easily add this to variESC Tool. Do you know where the source code is?

[BillGordon]

@Halbj613

For their remote it’s ok?

Appears to be.