Hi, just wanted to share my first esk8 build with you all since I’ve gained so much important information over the years reading this forum.
I’m not much of a write up guy but I’m doing this out of respect for all the people sharing how to diy safely.
Hope you enjoy
The Deck was made by eLDoska in russia. Really nice deck and great feel, needed sanding and was vinyl wrapped afterwards. I did not like his battery tray and I only wanted 12s4p so I opted to 3d print my own design in Polymax Tough PETG and use 2mm powder coated aluminium as bash plates, secured with m3 hardware and gasket sealer. Survived some beatings with hitting the ground so far so good.
Flipsky 6374’s 190kv
Trampa IR trucks
Since the photos I’ve swapped to Riptide 68a and 78a wfb + venom cones up front. Has the turning circle of a DKP truck but comes at a cost of stability over 20mph.
Gearing is 5.5:1, Top speed is not my thing
Stormcore 60d+
Hoyt remote
12s4p Molicel p42a
