After your great feedback, I have made some changes to my budget mountain board.
I will now be using 2 6s2p batteries in series to get the 12s power
I also changed out the esc for the DV4
For my motors, motor mounts, trucks, and wheels I’m going for the flipsky mountain board kit, I know its not the best but I have to save somewhere and I will most likely switch to an MBS matrix and mbs wheels once I complete the build.
V4X remote
the system will be based in an MBS core 94 and everything with is stored in a 1150 Protector Case
I’m planning to store the esc in the case with the battery, is there anything I need so the ESC can reach the motors?
The total comes out to around 1080$
Is there anything else I need for this board to work?
there’s almost no way of building a board without learning how to solder. It’s super difficult and is limiting. You should learn, its really not that difficult.
Bruh… did u really think you’d be able to build an electric vehical without being able to make a solder joint? It’s not that hard to learn. Don’t be scurred.
Also, I have that FS at drivetrain that I’ll sell you super cheap w motors incl. DM me. No reasonable offer will be rejected.
You could always try to ask someone like @Skyart to do the drivetrain and esc portion for you. Or you’ll have to order from someone soldered adapters. Or you’ll have to send parts to someone who will solder stuff for you.