This. They have a brake chopper integrated??
1 Like
ITS THE REAL THING!!!
this is the future we needed, someone uninstall the walking dead DLC pls
3 Likes
Yeah, i know the Nuff branding, its the same booster like onan just rebranded. I started back in 2017 with the first x2 model which ran in BLDC mode. Was pretty cool for me to begin with to get some experience riding electric skateboards and i always was pretty happy with it. Never had any problems with the electronics, just the insight alu parts for the hub motor wheels always broke by hitting a rock or a curb, bc of their thin, weak construction, but i figured out by using them āringsā which lock the wheel sleeves from the outside fit also prefectly on the inside where the week part is and ordered some in china to simply bolt them on this existing week part and it works prefect until today. Best of all is that, if this additional ring is mounted, the fitting with the wheel sleeve on the inside seems if it was build like that. After Onan released their second model which had some upgrades on the electrics i decided to try this, too and im since then i was much more happy after doing the described simply modification. In 4wd this thing is pretty powerfull and got lots of torque, range and power. Nothing against them beasts in here, but strong and fast enough to fulfill all my needs and wish for adrenaline. Im not a racer anyways, i like going rough roads and sidewalks on hard wheels and dropping the curbs and some stairs. One big issue or weakness all hub motors have is the mounting to the truck. I broke lots of motor mounts and hangers so far, bc the hangers are weakened for mounting a weaker part that holds up the motors with a tiny just also weak keyway. If the keyway holds up, the aluminium will get ripped of the achsle by simply turning off by the force of hard breaking or impact. Im thinking about a solution all day(specially for my motors bc their keyway is differtent from other hub motors which got the same problem in the end), but i have fucking no idea how to solve this problem and what sucks too, is that i cannot use standard truck hangers for the motors. So i stuck with this cheap chinese hangers which brake like toothpicks.
hahaha, im used to hard wheels, bc my root is street skating and we like the wheels really hard, but i can understand that the hardness is not the best use for electric boards, bc eskating lies near to downhill skating and not to street skating and for a maybe not experienced rider they feel pretty rough and uncomfortable.
2 Likes
Yes, copper with a tiny little āchipā that works perfectly. Looks quite easy and does its job, thats what i can tell about that. I would suggest this solution for everyone, but i read so many posts of ppl who wouldnt trust this method so im not the one they would believe anyways.
So dudes, dont break with fully charged battery packs hahahahhaha
peace
1 Like
Send me nudes of this brake chopper, a TVS+Zener diode combo and the fat copper rod and itās done haha Iāll make some! 
Well sayonara social lifeā¦ Hello nightmares hahaha
this is the partā¦
Yeah i can send you this one when the corona stuff is over my friend. No problem.
1 Like
Thanks man 
ok yes a fat resistor is inside these big copper cases, it burns the excessive energy away, simple but reliable.
1 Like
dont know how it worxā¦electric epileptix you know? hahahhaha
Yeah if you know how it is build, i can tell you just it worx and it is reliable.
Never had any problems going down on steep hills with fully charged batteries.
1 Like
Paint me like one of those french girls XD
6 Likes
You make that ? Did you do ? 
3 Likes
yeah man itās real, itās a new half life game!!
1 Like
Just received the prints today,
wolfshark graphic for my wolfshark - i tinkered with the original graphic to spread it out over the whole deck
Darth vader for evolve CGT - for a local rider, took a low res internet image and enlarged
The skeleton for my demonseed 44 - commissioned a local artist to draw this up for me, was not cheap 
6 Likes
Looks beautiful !!! Canāt to see it on decks 
3 Likes
Cheers! Oh me too brother, this has been in the works for some time now, very excited to get them down on the decks.
3 Likes
beautiful board, man and so damn pretty low to ground.
I love it.
1 Like
We should talk pricing.
2 Likes
Shoot me a pm with your deepest, darkest desires and weāll see what eventuates.
2 Likes
2 Likes
I tried, canāt say Iām a fan.
1 Like