Yeah, I used to run this on my board to determine power output on a non-VESC based ESC and it ran flawlessly. She’s a bit chunky though, although very useful for checking stuff, I made it with an XT60 on either end so I don’t have to use it all the time and can transfer it to other chargers
bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt https://www.amazon.com/dp/B013PKYILS/ref=cm_sw_r_cp_api_i_xDeUDb690XJ5V
Shoulder bolts I’m assuming?
Nope not shoulder bolts, I don’t like shoulder bolts at all.
these will be proper axles with M12 thread that goes into the hanger.
Then the axles of 8 or 10mm and then a proper bolt and thread. @Itsmedant
What motor mounts are going to fit?
Probably his own
Details?
Oh damn!! Let me know when you get a few sets done up! I’m a big boi (250lbs) so I’m always interested in something that can take my abuse.
It’s a programmable LED controller that someone in the EUC community created to control the stock LEDs in the Gotway MSX. The lighting options for the MSX are all just silly rainbow lights with no option to do simple white in the front and red in the back. This changes that 
But yeah… Unicycles. So not sure if you’ll care much, but I’m sure this module could also be used to program LEDs for a board too 
So a much simpler version of a ttl system?
where can we follow that project?
I haven’t read up too much on that yet. I think this just sends out simple lighting patterns. It doesn’t take in any feedback for like braking or anything like that.
His YouTube is here
We are also making motor mounts that will go with our hangers.
suitable to fit all 63XX motors.
That copper tho. Looks great
@ryansinatra
I have looked at that style ABEC wheel adapters with the bolt-thru connection as well, and seeing some of the problems you are experiencing, I think this may be a great option, let us know your progress!
Jesus, no. He’ll be over here dropping dong faster than a preteen texts.
If it’s anything like the last dong he dropped, im in for the ride
Oops.
That must be some cheek ripping torque O.o