Yes just makes making series connections way easier
And @KfromtheBay is right, just repurposed 18650 belt.
Yes just makes making series connections way easier
And @KfromtheBay is right, just repurposed 18650 belt.
The splits may not line up perfectly. Looks like a majority of this style strip is made for use on 18650 cells. That’s not to say you can’t weld on the other areas of strip?
Awesome! I will give it a go next time!
Thanks for the helpful information!
You just gonna drop that there without giving us a how to!?
Looks great
1st step in the how to.
Don’t use a motor with ridges
Stuffed rags in the motor and taped it off
Stripped the paint with a tiny bit of stripper and mostly a brass wire wheel on a dremel.
Sanded the motor (motor shaft in a drill and 220 grit)
Cleaned and degreased
Used cold bluing solution (mostly used for gun barrels and parts)
I’m not 100% sure I like it I’m still working and reworking the bluing.
It’s cold and snowy and I’m bored
Edit: FYI cold bluing comes off pretty easy with vinegar
Do you want to share the files? I am looking for a design like this to convert mine to thumb drive.
I will
But it’s not finished yet
I can’t be the only person who read it as Peacedozer right?
Never heard of the killdozer before, then today I’ve seen 2 build titles including it and also a friend shared a trailer for a documentary on Facebook.
@Dareno I think @Chibatterysystems title should be “Sometimes reasonable men must do unreasonable things”
Are those the decks you were posting 3D models of? Did you make them?
No not yet. I will try 3D milling of my models soon, but these are known Brand Decks. The first is an Airflow Mosquito i think it is called, the second is an Baffle 37 by Original skateboards and the third is a never summer superfreak.
The last one is a Makali Sk 36.
lmao 20billion jasons
hahahaha, its in its place
OSE 8.0 mm.
Interesting
Listen I almost called it a BBC but figured that was just too easy.